Discover What to Expect When Replacing the Siding on Your Home

September 1, 2022

Discover What to Expect When Replacing the Siding on Your Home

One of the most common exterior home improvement projects that many homeowners undertake is siding repair or replacement. Siding panels are usually made from materials such as plywood, fiberglass, or composite and can suffer wear and tear from harsh weather conditions.

When siding begins to decay or break down, it may need to be replaced to maintain the structural soundness of your property. When you choose the right material for your house, you can prevent having to replace siding.

A few things to think about when you’re trying to decide whether or not to paint your roof white are the weather conditions where you live, the kind of roofing material you have, and what appearance you want for your house.

It’s critical to have a good idea of what to anticipate throughout the whole procedure in order to avoid any unpleasant surprises and ensure a pleasant, trouble-free experience.

Here are five important things to bear in mind:

Removal of old siding 

Removing old siding is one of the first activities when it’s time to replace a siding. This may be a difficult task, especially if the previous siding is in poor condition and was put in many years ago.

There are various ways you can go about this, such as yanking out nails or staples with a hammer and chisel, sawing them out with regular or power tools, or prying them up with a crowbar.

Here are some ideas for removing old siding:

  1. To start, take off any trim or decorations that are attached to the siding.
  2. Remove the old siding to make way for new siding. If the old siding is nailed in place, pry it off using a pry bar after removing the nails with a hammer and chisel.
  3. If the siding is adhered to, use a chisel to cut through the glue and then pull it off of the home.
  4. When removing old siding, be careful not to scratch the underlying walls or roof.
  5. After the old siding is removed, you may begin to paint the home.

Use a pry bar to remove the old siding by loosening the nails and pulling it off of your house.

Prepare the exterior surface before attaching new siding

After you take the old siding off, you need to prime the surface before adding new siding. You can do this either by painting the house or using a primer.

If you want to install vinyl siding, you must choose the method of preparation. It’s preferable to paint over old siding if you’re replacing vinyl siding.

Before you can add new siding to your house, you will need to check the frame for any damage and make repairs as necessary. Once that is taken care of, clear away any debris from the area around your home. Finally, apply paint to the exterior surface of the panels.

Install the new siding carefully, paying attention to correct spacing and alignment

Before you begin cutting the panels, double-check that you have precise measurements for your home’s dimensions.

When installing new solar panel modules, keep them as level as possible while you work. Keep an eye on the panels around doors and windows in particular.

To keep the panels in position, use lots of nails or screws to secure them in place, avoiding any potential moisture traps.

Allow adequate time for the adhesive or paint to dry before adding trim or accessories.

Inspect your new siding, and make any necessary repairs before painting the home 

It’s important to know that you shouldn’t paint over a crack or tear in your new siding. If there is any damage, make sure to repair it before painting. 

Cleaning and Setting up are required steps

Replacing your house’s siding may make a big difference in the appearance and value of your home. However, there is still more to be done after the new siding has been installed.

Once your siding has been replaced, it is important to clean and prepare the area for Future projects. This involves getting rid of old glue and sealant from the house as well as any dirt or scraps that may have resulted from installation.

The installation process involves ensuring that the new siding is completely sealed and protected from the elements. All of the seams are coated with sealant, as well as trimming and caulking around doors, windows, and other openings to prevent moisture penetration. To keep it looking brand new, you must also paint or stain it.

Taking the time to properly clean and seal your new siding will ensure that it lasts a long time.

How much does siding replacement cost in general?

Siding replacement is both a costly and time-consuming process, but there are several methods to cut costs. The first step is to assess the quantity of siding that needs to be replaced. This may be accomplished by taking exterior measurements of your property. After you’ve got an idea of how much space there is, check rates for siding supplies and installation.

The cost of siding replacement may differ based on the type of material you pick. Among the most popular siding choices is vinyl because it is inexpensive and tough. Installing vinyl costs an average of $5-$7 per square foot.

The cost of a stone or wood deck will vary depending on the material used. If you choose a more expensive material like cedar or brick, such as those that might be found at an outdoor store, the price per square foot may be as much as $20.

Should I replace my siding myself or hire a contractor?

It may be tough to replace the siding on your house. When you should hire a contractor and when you should perform the work yourself are both crucial questions to ask yourself. If you’re only replacing a little piece of siding, such as around a window, you might be able to complete the task yourself. 

If you’re replacing all or most of the siding on your house, you should call a professional contractor.

There are many things to consider when selecting the best contractor, such as experience and licensure. Check with the Better Business Bureau as well as ask for referrals from friends and relatives.

After you have a handful of contractors in mind, request references from each one and follow up with those references. This will give you insight as to what it’s actually like working with the contractor. Also, don’t forget to get quotes from multiple people before making your final decision!

After you select your contractor, get a contract that outlines the specific work to be done as well as precisely what is included in the total cost. Make sure to ask about material and labor prices separately, as well as any warranties or guarantees offered.

ALWAYS read the contract thoroughly before you put your name on the dotted line.

Don’t spend another day worrying about your siding needs! Reach out to Blue Angel Roofing and General Contractors today, and we will be more than happy to help you.

Comments are closed.